Pairing the Sennheiser MB Pro 1/2 to the USB dongle

Pairing the Sennheiser MB Pro 1/2 to the USB dongle


Pairing the Sennheiser with USB Dongle.  Follow the simple steps below and advise if all working correctly:
  1. Press the Sennheiser Headset till you hear "Power Off"
  2. Take out the Sennheiser DECT USB dongle from your laptop.
  3. If your mobile phone was connected to the Sennheiser USB dongle, turn off the Bluetooth to disconnect the mobile phone from the USB Dongle. 
  4. Put back the Sennheiser DECT USB dongle to your laptop.  You should see the dongle flash intermittently.
  5. Press the Sennheiser Headset continuously for 6 seconds till you hear "Power On" and "Pairing".  You will then hear "Pairing Successful. Phone 1 connected"
  6. The Sennheiser Headset will pair with the Dongle making the dongle have a solid blue color.

    • Related Articles

    • Configuring EPOS | Sennheiser Headsets

      On this topic Download the EPOS | Sennheiser Software Configure the 3CX Web Client and Browser Extension Update EPOS | Sennheiser Software on Windows See also This guide takes you through the steps required to configure your EPOS | Sennheiser headset ...